AlanArzur29

Hello,

I have an installation with a SIMOTION D425 2PN / DP 
(I am new to this type of hardware), A HMI TP700 
comfort is associated. I have to integrate a S7-1515 
2PN and communicate with the same HMI, the problem is 
that the HMI link with the s7-1515 is create and the 
variables called in the project I do not see the D425 
anymore.  

Second thing is it feasible to communicate between the 
s7-1515 and the D425, I guess yes with the Bloc LCOM 
but I do not really see how to implement it.

The second point is much less important (comunication 
in I / O).  

Can you help me?  

Cordially.

 

 Hello,

do you have one or two hmi connections in the Panel?
If you want to communicate with both Simotion and S7-1500 you need 2 HMI Connections.

What exactly you mean with "don't see anymore"?

Do you have some screens of the connection and wiring.

What is the problem with the LCOM ? There is a application example with deteiled instructions howtodo.

Or you use a i-Device coupling between SImotion and S7-1500.

Regards

Christoph