Good Day

we have working with a project, DAISY CHAIN CONNECTION using CB1241, we have to connect 25 set of flowmeter (MOD BUS RTU / RS 485) we use TIA S7 1200, PLC 1200, our problem is we could not communicate with flowmeters,

1. what are the things we need to do?

2. what are the parameters needed ?

please advice ...

Please don't post twice for the same problem.

See also here, 3rd reply:

https://support.industry.siemens.com/tf/de/en/posts/how-to-make-new-post/132653/?page=0&pageSize=10#post790565

Closed cause question posted twice.

The second thread with the subject Could not communicate with flowmeters is published within the conference Communication / Networks.

Best regards,

Jen_Moderator