Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Data logging stopwatch

Created by: Nordens at: 10/29/2018 6:45 PM (3 Replies)

Rating (2)

Thanks 2

4 Entries

10/29/2018 6:45 PM	Rate (0)
Nordens Posts: 2 Rating: (0)	Hallo I'm having trouble doing a data logging on stopwatch function. can you help? I would like to read how long a signal is active and then restart the stopwatch function.
Nordens Posts: 2 Rating: (0)	Last edited by: Nordens at: 10/29/2018 6:55:41 PM
Suggestion To thank Quote Answer

10/29/2018 7:06 PM	Rate (2)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2023 Posts: 31595 Rating: (3928)	Hello Nordens, at first welcome to the forum. That should work. But you have to pay attention to a few things. If the stopwatch is stopped, you must first trigger the logging process and then reset the stopwatch first. And between the log operations must be at least a pause of 500 ms.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RKBIS

10/29/2018 8:40 PM	Rate (0)
Nordens Posts: 2 Rating: (0)	Thank you for your help
Nordens Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

10/29/2018 8:45 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2023 Posts: 31595 Rating: (3928)	Hello Nordens, you're welcome. Is your problem now solved?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on