Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Data records

Created by: skz at: 9/11/2014 10:40 AM (10 Replies)

Rating (2)

Thanks 1

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

9/11/2014 10:40 AM	Rate (0)
skz Posts: 6 Rating: (0)	Hello, I have 1 recipe with 60 elements and a few data records In the data records i put a certain elements true. my question is can i put a timer between the elements which become true? thanks skz
skz Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

9/11/2014 1:33 PM	Rate (0)
skz Posts: 6 Rating: (0)	a timer or delay between State1Lamp1 .. State1Lamp2 .. State1Lamp3 .. and so on Attachment Datarecords.JPG (567 Downloads)
skz Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

9/11/2014 1:53 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, I'm not sure about your issue. you defined different elements "State1Lamp1, State1Lamp2, State1Lamp3". Each of these elements belongs toa tag. Then you defined the data records. in each data record you define values for the tags. in runtime, you choose a data record and send the data to the plc. where do you want to set the time delay? Sending the data one after the other to the plc ( So if you choose "tweetal diagnoaal" state1lamp1 is set to 1, after one second state1lamp2 is set to 1...)? Or going through the data records (So first all tags are set to the values of "tweetal diagonaal", then after some time all tags are set to "Diagonaal"...)? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

9/11/2014 3:18 PM	Rate (0)
skz Posts: 6 Rating: (0)	thank you for your response i want it in this part Sending the data one after the other to the plc ( So if you choose "tweetal diagnoaal" state1lamp1 is set to 1, after one second state1lamp2 is set to 1...)? is it possible in FBD? thanks
skz Posts: 6 Rating: (0)	Last edited by: skz at: 9/11/2014 3:46 PM
Suggestion To thank Quote Answer

9/11/2014 3:47 PM	Rate (1)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	skz thank you for your response i want it in this part Sending the data one after the other to the plc ( So if you choose "tweetal diagnoaal" state1lamp1 is set to 1, after one second state1lamp2 is set to 1...)? Beste, uw uitleg is ons niet geheel duidelijk, bij het veranderen van datarecord wenst u een vertraging tussen het veranderen van de recipe elementen? Dit is zeker geen "build-in functie" en u zal de PLC logica moeten inzetten om dit te realizeren. Dit wil zeggen dat bij het veranderen van "recipe data record" u de plc logica zal moeten wijsmaken dat de"recipe elementen" één voor één, met een instelbarevertragingstijd moeten updaten. Indien ik u verkeerd heb verstaan aarzel niet om te reageren. Groeten, Jens Google Translation for the non-dutchspeaking people : Dear, your explanation is not entirely clear us, when changing data record you want a delay between changing the recipe elements? This is definitely not a "build-in" functionality and you will have to use PLC logic to realize this. This means that when changing the "recipe data record" you will have totell theplc thatyouwant tochangethe "recipe elements" one by one, with an adjustable time delay to update. If I have understood you wrong, do not hesitate to respond. regards, Jens
	Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank Quote Answer

9/11/2014 4:03 PM	Rate (0)
skz Posts: 6 Rating: (0)	Yes thats what i want, im using the language FBD Attachment Capture.JPG (447 Downloads)
skz Posts: 6 Rating: (0)	Last edited by: skz at: 9/11/2014 4:08 PM
Suggestion To thank Quote Answer

9/11/2014 4:21 PM	Rate (1)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	skz Yes thats what i want, im using the language FBD Dear skz, upon creating a recipe view you can select at general properties to which tag your "recipe number" and "recipe data record number" has to be stored. You could check the data recordnumber for a value change, once the value changes you could read your recipe elements and write them in the location you want (for further use in your program). You could add timers in between to make sure the transferring happens element per element and not all at once. Do not forget you can use the area pointer of the HMI combined with "job mailbox" (job 69&70 to be exact)to change recipenumber and data records via PLC. I hope this helps you. Kind regards, Jens
	Last edited by: Jens_app at: 9/11/2014 4:52 PM Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank Quote Answer

9/12/2014 7:57 AM	Rate (0)
skz Posts: 6 Rating: (0)	thanks I filled that parts already in recipe_view. How do i read my recipe elements?
skz Posts: 6 Rating: (0)	Last edited by: skz at: 9/12/2014 8:57 AM
Suggestion To thank Quote Answer

9/12/2014 5:50 PM	Rate (0)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	skz thanks I filled that parts already in recipe_view. How do i read my recipe elements? Hi skz, link your recipe elements to a tag, go to recipe > go to elements > and link your recipe elements to a plc tag. Without a link to your plc the recipe elements would be quite useless. Think of an approach with counters and indexing to solve your problem, offcourse it's programmers dependable so you can apply witchever approach that suits you best. Kind regards, Jens
	Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

9/16/2014 1:12 PM	Rate (0)
skz Posts: 6 Rating: (0)	How can i check for a data record change, is it possible with RDREC_DB. i have a loop and when i change my data record the loop continuous with the other data record but i want it to start at Case : 1
skz Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Archives / Recipes

Follow us on