Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Daylight savings time problem

Created by: Nikzitronik at: 3/3/2012 4:34 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

3/3/2012 4:34 PM	Rate (0)
Nikzitronik Posts: 150 Rating: (17)	Dear All, I am writing an application where I have to incorporate daylight saving time. I read the manual and used FC61 in a test_project that all worked fine. I then incorporated FC61 and all the coplementary FC's & DB's to my original project, but it does not work. FC61 gives a RET_VAL=1 which as per the help means "No error, but date jump" which for me is confusing. The input to FC61 is derived from SFC1 that works fine as I checked its output in a vat table. Regards
Nikzitronik Posts: 150 Rating: (17)	Last edited by: Nikzitronik at: 3/3/2012 4:48 PM
Suggestion To thank Quote Answer

3/5/2012 4:13 PM	Rate (0)
Aret Posts: 2348 Rating: (259)	What is output of FC61? You can test how it works by moving date to summer and back.
Aret Posts: 2348 Rating: (259)
Suggestion To thank Quote Answer

3/5/2012 8:34 PM	Rate (0)
Nikzitronik Posts: 150 Rating: (17)	The output of FC61 was inconcistent hexadecimal values. Whatever chance did not alter FC61 output. What troubles me is the meaning of date jump in the manual.
Nikzitronik Posts: 150 Rating: (17)
Suggestion To thank Quote Answer

3/6/2012 5:37 AM	Rate (0)
Aret Posts: 2348 Rating: (259)	Please ensure you have right values in DB_rules. Thing you should pay attention to - time_shift =2 (1 hour), day, month and week for jump dates must be set. Also can you upload your code here for further investigation?
Aret Posts: 2348 Rating: (259)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on