Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Debug (monitor) and SCL

Created by: dande74 at: 8/24/2007 3:50 PM (6 Replies)

Rating (19)

Thanks 28

7 Entries

8/24/2007 3:50 PM	Rate (1)
dande74 Bronze Member Joined: 2/5/2007 Last visit: 3/17/2023 Posts: 101 Rating: (10)	Hi! I am trying to debug (monitor) a simple SCL code without any luck. Have done as the onlinehelp says but gets the following error. --- S7 SCL Debuggger Cannot test block. Debuginfo was not generated. --- Have been trying with two different computers. One of them isa Field PG. Have been trying with both PLCSIM and a real PLC (315F-2 PN/DP, Failsafe NOT enabled) I know I have manage to do this for about a year ago. Cannot figure out what I am doing wrong this time. STEP 7 5.3 SP3 SCL 5.3 SP1 PLCSIM 5.3 SP1 -- Daniel

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Saruca Ginny_178

8/24/2007 5:15 PM	Rate (17)
chat Experienced Member Joined: 8/31/2006 Last visit: 4/28/2020 Posts: 8 Rating: (29)	Hi dande74, In the SCL editor under tab Options - Customize, Compiler you have to set the flag: Create debug info. After recompiling the blockyour problem is fixed. good luck, Chat

Suggestion To thank Quote Answer
This contribution was helpful to 26 thankful Users Saruca Mariusra abdurrahim Palo PLC usdy emrezenn MaseehS. Vital krzych_s MSikandar Ginny_178 nandgate bVd_creation z00m RC23 Ilya_Yakovlev joe.L Dante78 AutoGen_800734 ASUTPmpp Sachinpatke Tyhoon Prassanna G EC&I Engineer E.Ridy FranGarcia

8/27/2007 7:20 AM	Rate (1)
dande74 Bronze Member Joined: 2/5/2007 Last visit: 3/17/2023 Posts: 101 Rating: (10)	Now it works. Thanks a lot chat.

Suggestion To thank Quote Answer

11/19/2012 6:05 PM	Rate (0)
Artem C Posts: 69 Rating: (4)	Good advice, i brake my mind before reading that, thank you
Artem C Posts: 69 Rating: (4)
Suggestion To thank Quote Answer

9/16/2014 10:38 AM	Rate (0)
PG84 Posts: 1 Rating: (0)	Thanks! It helped me as well. :)
PG84 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/20/2019 7:26 PM	Rate (0)
BboyAPI Posts: 1 Rating: (0)	Thank's a lot!!!!
BboyAPI Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/22/2021 9:13 AM	Rate (0)
FranGarcia Regular Member Joined: 7/27/2021 Last visit: 9/26/2022 Posts: 1 Rating: (0)	Thanks!!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on