Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

debug profibus slave use cp5611

Created by: ninesunsz at: 4/29/2010 4:12 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/29/2010 4:12 AM	Rate (0)
ninesunsz Posts: 2 Rating: (0)	I develope profibus slave station use CP5611 now. i have an s7300plc as master station,i want to monitor the binary data stream to analysis relative data,Can i use cp5611 to monitor the data on bus? Is there any document about debug profibus slave station?Thanks a lot
ninesunsz Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/29/2010 6:43 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 12/11/2023 Posts: 2997 Rating: (1040)	Hello ninesunsz it is your lucky day, as the original Amprolyzer is still available free of charge and can be downloaded from the link below: Amprolyzer V3.2 Bus Monitor - Diagnostic Software for PROFIBUS It should suffice for what you want to do, if you do need more "sophistication"though I would suggestgettingProfitrace 2 from Procentec. I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on