Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DES_DIAG

Created by: VoidMain(BR) at: 4/5/2011 6:45 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

4/5/2011 6:45 PM	Rate (0)
VoidMain(BR) Regular Member Joined: 1/28/2010 Last visit: 6/27/2024 Posts: 35 Rating: (0)	hi to all! I have a new installation of PCS7. I can't to compile with option "Generate Module Drivers", an error occurs on the DES_DIAG, don't is possible to import the library. I have installed the Drive ES V6.1, not understand this error. PCS7 V6.1 + SP2 Step 7 V5.4 + SP5 Driver ES PCS7 V6.0 SP1 Driver ES Upgrade V6.1

Suggestion To thank Quote Answer

4/6/2011 2:10 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Can you a post a screenshot of the error? Obviously the problem is with Drive ES Library.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VoidMain(BR)

4/6/2011 2:52 PM	Rate (0)
VoidMain(BR) Regular Member Joined: 1/28/2010 Last visit: 6/27/2024 Posts: 35 Rating: (0)	Hi Phantom! The error is simply: E: Could not import block DES_DIAG Where can this block? Which library?
	Last edited by: VoidMain(BR) at: 4/6/2011 2:52 PM
Suggestion To thank Quote Answer

4/6/2011 4:28 PM	Rate (0)
VoidMain(BR) Regular Member Joined: 1/28/2010 Last visit: 6/27/2024 Posts: 35 Rating: (0)	Now it's ok! I delete the symbol DP_DES1 (FB628) and copy DES_DIAG (FB628) of the library DRVPCS7 to my blocks. Now I can to compile the project with "Generate Module Drivers" option. Bur, other erro occurs: E: Parameter EN_MSG_D of block EX502 does not exit This block is OB_DIAG1 (FB118), in a (@) chart.

Suggestion To thank Quote Answer

5/23/2016 3:28 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by moji..f is split to a separate thread with the subject Install library DRVPCS7 [v6.1] problem. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on