Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Determine the ability of the PLC memory

Created by: Martins_Eng at: 8/25/2012 9:11 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/25/2012 9:11 PM	Rate (0)
Martins_Eng Experienced Member Joined: 7/17/2010 Last visit: 7/26/2022 Posts: 184 Rating: (0)	It is possible to determine how much memory the program will use the PLC before buying the CPU.

Suggestion To thank Quote Answer

8/26/2012 10:28 AM	Rate (0)
fbelic Silver Member Joined: 2/17/2009 Last visit: 12/1/2020 Posts: 327 Rating: (28)	Greetings Sure it is: you can write it before buying CPU. But seriously, it depends mostly on experience. You can try comparing it to some past programs you made, especially if you are using some standardized blocks (e.g. PID...). Best regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on