Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DI/DO/AI CARD MODULE

Created by: godhot at: 2/25/2008 7:36 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/25/2008 7:36 AM	Rate (0)
godhot Posts: 1 Rating: (0)	Dear sir I"m working beginner on sicam RTU module an RTU consist with :1 CPU 412-1,MCP(6MD1010-0BA00),3x DI-32 inputs(6MD1021-0AA00),2x DO-32 inputs(6MD1022-0AA00), 2x AI(6MD1031-0AA00). but The Addresses- of I/O module not yet Fully actived,such as Modul DO just 11(elevent) address actived only,Modul AI just 14(fourteen) addr & DI modul 10(ten) addr input. And so,How to add new adddress on the existing modul with easy way, to the setup or configure modul we have PC with simatic manager and MPI Cable. Thanks for your attention.
godhot Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/9/2008 7:36 PM	Rate (0)
Marcio R. Santos Silver Member Joined: 12/5/2005 Last visit: 12/9/2024 Posts: 239 Rating: (9)	Hi, Sorry, but you could explain your problem?
	Márcio Santos www.marcioroberto.wordpress.com
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SICAM

Follow us on