Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

difference between address IW and PIW??

Created by: sunn7 at: 3/2/2010 3:33 PM (1 Replies)

Rating (0)

Thanks 5

2 Entries

3/2/2010 3:33 PM	Rate (0)
sunn7 Posts: 152 Rating: (2)	hi all can any body calrify me smethng about the address area in STEP7 1) what is the difference between Input word (IW) and Peripheral input word(PIW) in one last project , the program was done in FBD/LAD. and in HWCONFIG, there are AI-AO cards. but no tags defined inside. but in symbol table i find all Analog input and outputs with PIW address. 2) then how these I/Os are connected with CPU, when it is not defined inside cards?? can any body explain me thanks in advance sun
sunn7 Posts: 152 Rating: (2)
Suggestion To thank Quote Answer

3/3/2010 12:04 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 6/3/2023 Posts: 2966 Rating: (1025)	Hello sun7 perhaps this FAQ will help answering your questions: Where and when do you need peripheral addressing? I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer
This contribution was helpful to 5 thankful Users Berg sunn7 SpKV hag010 C-3PO

|

Share this page:

Share this page on...

Follow us on