Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Difference between Operation Enabled and Pulses Enabled

Created by: davidengr at: 8/19/2014 12:36 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/19/2014 12:36 AM	Rate (0)
davidengr Experienced Member Joined: 5/11/2010 Last visit: 6/5/2023 Posts: 15 Rating: (0)	Can anyone tell me the difference between operation enabled (r52.2) and pulses enabled (r899.11)?

Suggestion To thank Quote Answer

8/19/2014 3:34 AM	Rate (0)
bright Regular Member Joined: 9/27/2008 Last visit: 11/26/2024 Posts: 9 Rating: (0)	Hi; 'pulse enable' stands for the drive's pulse, 'operation enable'means everything is ready, the drive could follow setpoint. normally, after 'ON' command thesequency willbe: 899.1=1 .... 899.8=1 899.11=1 (pulse enable) then 899.2=1 (operation enable) 1407.3=1 and you can seethe setpoint start to ramp up with BR Li hongju

Suggestion To thank Quote Answer

8/21/2014 4:22 PM	Rate (0)
davidengr Experienced Member Joined: 5/11/2010 Last visit: 6/5/2023 Posts: 15 Rating: (0)	Thanks. So you are saying that pulses can be enabled, but operation can be not enabled? I couldn't find anyway for one to be on without the other.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on