Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Different loading screens RT project WINCC V13 SP1

Created by: Unreality at: 4/30/2016 9:01 PM (11 Replies)

Rating (2)

Thanks 2

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

4/30/2016 9:01 PM	Rate (0)
Unreality Bronze Member Joined: 9/9/2014 Last visit: 7/11/2024 Posts: 246 Rating: (40)	Hello! Who can explain which affects different types of display information about the launch of the project WINCC For example, when all is compiled, you start to run the project, and you see a pop-up window with the stages of loading the individual elements of the system (for example, how loaded alarm archive and etc.), and in the system tray icon also appears on the start of the project. And sometimes after compilation, instantly pops "some" window for a split second, and more what information is not displayed, except in the tray icon is visible on the WINCC start of the project ... And the same thing could happen in the WINCC in V7.0 SP3 or higher version Has anyone experienced this?(I hope well explained)
	Best Regards PMA
Suggestion To thank Quote Answer

4/30/2016 10:01 PM	Rate (1)
Davinator Gold Member Joined: 1/4/2013 Last visit: 10/15/2024 Posts: 1127 Rating: (102)	Hello, I got a similar problem when: 1) HMI firmware was not updated to project's firmware. 2) I did not rebuild all on HMI. Try these
	Searching for Siemens used/new equipments ? Take a look here : https://www.ravettiautomation.com
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Unreality

4/30/2016 10:18 PM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 10/9/2024 Posts: 550 Rating: (62)	Hi Unreality Can you please attach print screens or more data, I have read your post twice and did not get your problem. Unreality Hello! Who can explain which affects different types of display information about the launch of the project WINCC For example, when all is compiled, you start to run the project, and you see a pop-up window with the stages of loading the individual elements of the system (for example, how loaded alarm archive and etc.), and in the system tray icon also appears on the start of the project. And sometimes after compilation, instantly pops "some" window for a split second, and more what information is not displayed, except in the tray icon is visible on the WINCC start of the project ... And the same thing could happen in the WINCC in V7.0 SP3 or higher version Has anyone experienced this?(I hope well explained)
	Best Regards
Suggestion To thank Quote Answer

5/1/2016 3:03 PM	Rate (0)
Unreality Bronze Member Joined: 9/9/2014 Last visit: 7/11/2024 Posts: 246 Rating: (40)	Davinator Hello, I got a similar problem when: 1) HMI firmware was not updated to project's firmware. 2) I did not rebuild all on HMI. Try these I tried a full compilation, but it did not help ... This phenomenon has or does not affect the operation of the project. In addition, these same phenomena were in WINCC V7.0 Sp3 or higher Screenshots I'll post when I get to work on 4 May (when the holidays end)
	Best Regards PMA
Suggestion To thank Quote Answer

5/5/2016 2:10 PM	Rate (0)
Unreality Bronze Member Joined: 9/9/2014 Last visit: 7/11/2024 Posts: 246 Rating: (40)	Here is the screen with the usual views start By the way, after a few runs a full compile ("rebuild all"), run the project again, became a to start from the screen, as shown below Attachment Normal_Start.jpg (228 Downloads)
	Best Regards PMA
Suggestion To thank Quote Answer

5/5/2016 2:13 PM	Rate (0)
Unreality Bronze Member Joined: 9/9/2014 Last visit: 7/11/2024 Posts: 246 Rating: (40)	but the screen with a different views run that appears for a few seconds and disappears ... I only have time to see how it alternately downloaded files, resembling script name with the extension ".fct" What does it depend? Attachment Another_Start.jpg (264 Downloads)
	Best Regards PMA
Suggestion To thank Quote Answer

5/9/2016 10:22 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 10/15/2024 Posts: 13952 Rating: (1759)	Hello Unreality *.fct Files are involved in the Global Script Runtime. So when you activated Global Scripts in your Project the Global Script Runtime starts and the functions. It depends also if you have activated the Start of the VBS Debugger. but it should be a normal thing of the Runtime start. If there is no Error Mesage i sould be OK. you can use the apdiag Application to check if everything in Scripting works well. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

5/11/2016 7:20 AM	Rate (0)
Unreality Bronze Member Joined: 9/9/2014 Last visit: 7/11/2024 Posts: 246 Rating: (40)	All that I have described above, does not affect the scripts work and the program as a whole. And most interesting is that the same effects occur in the redundant station installed WinCC V7.0 SP3. With that, the manifested, as I noticed, when there is multiple non-stop editing the project runtime. I have addressed unto you, because I was curious, what it depends on this phenomenon, and can anyone experienced this? By the way, I use TIA PORTAL WinCC Professional V13 SP1 UPD8 (russian language pack is not installed)
	Best Regards PMA
Suggestion To thank Quote Answer

5/11/2016 8:59 AM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 10/15/2024 Posts: 13952 Rating: (1759)	Hello Unreality you can check in the WinCC logfiles if there is an error in the Startup of the WinCC runtime. You can look in the File: PMStart.log and WInCC_SStart_XX.log if you find an Error entry with a fitting Timestamp. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Unreality

5/12/2016 12:14 PM	Rate (0)
Unreality Bronze Member Joined: 9/9/2014 Last visit: 7/11/2024 Posts: 246 Rating: (40)	As luck would have it, after a complete compilation of all the shows (start) is normal. But I am confident that the problem will appear again soon, and I will look for it in the logs to you pointed out to me ...
	Best Regards PMA
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC RT Professional

Follow us on