Hi everyone,

I'm programming with TIA PORTAL V13 SP1, and simulating a  Simatic TP1200 Comfort panel in WinCC Advanced.

I was wondering if I could do something as the picture that I'm going to post here below.

What I want is to have two cursors and get the measure between them, the most important one is, the one which is in the y axis (so the dependent variable, not the time).

I want to know if this comnfort panel is able for do that, or may be it supports an external program which can run in Windows CE, or perhabs I didn't explore enough, but I must solve this problema.

Thanks so much, BR.

Hey dabopa,

look at the vbs programming reference for Comfort / Advanced, "FunctionTrendControl".

https://support.industry.siemens.com/cs/ww/en/view/109747176

Page 251. There you can find the possibilities of vbs-scripting.

rh1990

Hey dabopa,

look at the vbs programming reference for Comfort / Advanced, "FunctionTrendControl".

https://support.industry.siemens.com/cs/ww/en/view/109747176

Page 251. There you can find the possibilities of vbs-scripting.

Hey, thank you!

I've been checking all those function but there is no function for Comfort Panels which allow to do that, at least I could get nothing successful.

Any other suggestion?