Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Digsi 4 and SIPROTEC 7SJ63

Created by: Loxum at: 9/2/2010 3:00 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/2/2010 3:00 PM	Rate (0)
Loxum Posts: 2 Rating: (0)	Hello. My goal is to configure Siprotec protection device to send data over Ethernet to Sicam Station unit and further more to look information in WinCC. MFLB of my siprotec is 7SJ6325-4EB32-3FE0/EE What do you suggest I should use for Network connection (Optical, Profibus)? I would like to connect cca. 25 devices on one Sicam Station Unit. I configurated Protection device in Digsi Version 4.6 but I think this siprotec does not support IEC61850 protocol so I ask what type of connection I should use and how to confirurate it. In Digsi program settings for protection device are already set in Masking I/O table so I just need to pick signals out that I would like to be transmited on the network like alarms, currents, power... How do I do that, because IEC61850 station does not recognise my device among Available IEC61850 devices. Hope somebody can help me. Thanks
Loxum Posts: 2 Rating: (0)
Suggestion To thank

9/6/2010 10:09 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/24/2023 Posts: 4099 Rating: (193)	closed cause question posted twice. The second thread with the subject Configure Siprotec protection device to send data over Ethernet to Sicam Station unit and further more to look information in WinCC is published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

DIGSI
SICAM

Follow us on