Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

discret alarm but data type BOOL

Created by: rtut at: 6/14/2013 9:27 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/14/2013 9:27 AM	Rate (0)
rtut Posts: 42 Rating: (1)	I have the address where the accident is sent. But in the discrete alarm can not make a post in the alram view.how to do so if the bit went to the address to send a message and an alarm view and log. in descrets alarmreceiving data only INT and WORD. And analog alarm receiving data all, except BOOL. adress %DB32.X2.2 . This is what I'll stay. what isacknowledgment tag и bit и HMI adress. Thanks Attachment bit.jpg (708 Downloads)
rtut Posts: 42 Rating: (1)
Suggestion To thank Quote Answer

6/17/2013 1:44 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, See this link for alarms. Configuration of Messages and Alarms in WinCC (TIA Portal) Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

6/17/2013 2:22 PM	Rate (0)
rtut Posts: 42 Rating: (1)	thanks i already figured out))
rtut Posts: 42 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on