Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Display a deleted source

Created by: Tomcat at: 3/27/2009 2:06 PM (6 Replies)

Rating (2)

Thanks 0

7 Entries

3/27/2009 2:06 PM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hi, I have a problem: I deleted a source in Step7 by mistake. How can I get the source back? Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

3/27/2009 5:38 PM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 6/2/2023 Posts: 4448 Rating: (827)	Hello Tomcat, I think it's impossible to get the deleted soucre again. And I think you are in a real problem if your software is protected and you have deleted the source! Didn't you have another copy of your software?! Or can you upload the software from the CPU? If yes, then I think there's no problem. Regards,
	Last edited by: Ayman Elotaify at: 3/27/2009 5:38 PM Ayman Elotaify
Suggestion To thank Quote Answer

3/27/2009 8:41 PM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hi Ayman, I don't have the block. I was writing of my new block and thenI wanted to delete the old sources, which I don't need any more.But I deleted the wrong source. Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

3/27/2009 10:44 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (278)	Hi Tomcat, I think the only person in this forum who can answer this question satisfactorily is the one and only Dec! I suggest you send him a PM to bring this thread to his atttention... Regards
Phantom75 Posts: 2661 Rating: (278)
Suggestion To thank Quote Answer

3/27/2009 11:29 PM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hello Phantom, thank you for your hint! I will try it. Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

3/30/2009 8:42 AM	Rate (2)
Aret Posts: 2348 Rating: (259)	Can try:^) SCL sources are stored in \s7asrcom\000000x, wherex corresponds to CPU. If you have single CPU - you'll get 1 folder. You can try to recover it with some recover tools (i used R-Studio) - this way you'll get source, which can be opened by notepad. Please note, that you shouldn't work with project - becase "deleted" source can be rewritten. Another thing to try - if you compiled "right" source you can generate source out of block (in case of STL-source of course).
Aret Posts: 2348 Rating: (259)
Suggestion To thank Quote Answer

3/31/2009 8:19 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 6/2/2023 Posts: 547 Rating: (106)	I agree with Aret; I don't know any other way to retrieve a deleted source file. Dec

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on