Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Display and/or modify communication parameters

Created by: Panov at: 1/26/2010 2:38 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/26/2010 2:38 PM	Rate (0)
Panov Posts: 2 Rating: (0)	Hello, I use WinCC Flexible 2007 on a PC (in Runtime mode) and I would like to display to users the communication parameters (Speed, parity, number of data bit and communication port number) of the link between the PC and a CP, but I don't find the right procedure to collect these informations from the system in runtime(Maybe it is not possible). In a second time, I would like to know, if it's possible to modify these communication parameters in runtime mode. Regards. Stephane. Attachment Link parameters.JPG (27 Downloads)
Panov Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/8/2010 9:59 AM	Rate (0)
Panov Posts: 2 Rating: (0)	up.
Panov Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/8/2010 10:07 AM	Rate (0)
Manfred Gold Member Joined: 5/28/2008 Last visit: 12/8/2015 Posts: 901 Rating: (136)	Hello Panov, Sorry but i have to say, that it is not possible. regards Manfred

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on