Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Display OS Comments from steps in SFC

Created by: RoH@ at: 8/16/2007 3:45 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/16/2007 3:45 PM	Rate (0)
RoH@ Posts: 14 Rating: (2)	Hello! Is there a way to display the OS comments, in WinCC Runtime with I/O Field,from steps in SFC (sequential flow chart PCS 7). This comment is displayed as tooltip text when you put the mouse cursor over the step in SFC-visualization. Best Regards! /Robert
RoH@ Posts: 14 Rating: (2)
Suggestion To thank Quote Answer

8/17/2007 7:14 AM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 8/29/2023 Posts: 799 Rating: (63)	Hi Robert, Ithink you can use the textref tags (internal tags) witch are created for the SFC. Please look in the SFC structs witch are created in the OS. These textref tags are"pointers" to the textlibrary of the OS. Good luck, Jaapie

Suggestion To thank Quote Answer

8/17/2007 3:53 PM	Rate (0)
RoH@ Posts: 14 Rating: (2)	Hello Jaapie! I dosen´t find a tag that contains this comments. I have attacheda bitmap so you can see which comment i mean. /Robert Attachment SFC_CONFIG.jpg (69 Downloads)
RoH@ Posts: 14 Rating: (2)
Suggestion To thank Quote Answer

8/21/2007 3:45 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 8/29/2023 Posts: 799 Rating: (63)	Hi Rob, I'm sorry, but then I do not think it can be done. Anyone? Jaap

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on