Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Displaying and filtering Alarms logs

Created by: CVE at: 3/31/2011 3:56 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/31/2011 3:56 PM	Rate (0)
CVE Posts: 12 Rating: (0)	Hello guys, I just finish a complete WinCC Flexible project and we got really great feedback on our work! Unfortunately I am a little bit disapointed by the alarm view in wich I displayed an Alarm Log. I made great filters for my "real time" Alarm View and I wanted to do the same with the alarm log. Unfortunately the filter is grey and I cannot configure it. When reading the help, just found tyhis information: "Filtering is not possible for the following alar views: (...) - Alarm View which is configured for displaying alarms of an alarm log - Alarm Window which is configured for displaying alarms of an alarm log" This is really frustrating and I would like to know how I can use this alarm log. Is there any workaround or way to display the alarm that happened a few hours ago?
CVE Posts: 12 Rating: (0)	Last edited by: CVE at: 3/31/2011 3:57 PM
Suggestion To thank Quote Answer

3/31/2011 5:43 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 9/21/2023 Posts: 1557 Rating: (161)	Hello, not with a alarm log, but with the alarm buffer. best regards.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on