Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

displaying CPU status on WinCC screen

Created by: Shailesh at: 11/6/2006 7:29 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/6/2006 7:29 AM	Rate (0)
Shailesh Posts: 6 Rating: (0)	I am using a S7300 CPU313c-2DP along with WinCC 6.0. I want to show tha cpu status on a screen. Cananyone tell me how can i show run/stop status,cpu loading etc in wincc? For run /stop i tried using LOG1 bit but its not useful for showing STOP status. also i dnt know whether its possible to show the CPU loading(scan cycle time in %) pls help ......
Shailesh Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/6/2006 1:16 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, the following link will help You: http://support.automation.siemens.com/WW/view/en/9985721
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

11/7/2006 12:08 AM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 12/3/2024 Posts: 549 Rating: (107)	I am not sure if this diagnostic tools works with CPU 313 though [:P] Dec
	Last edited by: Dec at: 11/7/2006 1:41 AM
Suggestion To thank Quote Answer

11/7/2006 12:19 PM	Rate (0)
Shailesh Posts: 6 Rating: (0)	I went through the link and it is for S7 400/ 400H systems only So is there any other way?? Atlest I want to show CPU status i.e RUN/STOP/SF etc... Right now I amable to show the % loading(i.e. scan cycle time) and for RUN/STOP Iam using LOG1(Constant 1 ) bit from PLC. Thsi bit works well for STOP to RUN transition but in case of RUN to STOP transition the status of the bit changes only when Irefresh the screen...I really dont know why this is happening.
Shailesh Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on