Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

distributed safety s7-315-2dp output

Created by: rinuspieters at: 4/10/2009 9:11 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/10/2009 9:11 AM	Rate (0)
rinuspieters Posts: 2 Rating: (0)	I'm using a 315F-2dp, 2x24 di cards and 4x8Do card, all safety. Ialready realiced that my safety input signal can be read in the standard user program. the problem I've got is that my standard user programm treu a memory bit a signal gives on my output adress. i have een FB1 (fs) withSTAT datawitch will be written inFDb10. the signals from the inputcard can I acces in my standard program by calling the FDB10. now I want to write my standard program into the FDB10 and then write it to the the output, but this doesn't work. is there anyone who has a sulotion. Regard Rinus
rinuspieters Posts: 2 Rating: (0)	Last edited by: rinuspieters at: 4/10/2009 10:05 AM
Suggestion To thank Quote Answer

4/10/2009 1:35 PM	Rate (0)
pigroplc Bronze Member Joined: 4/3/2008 Last visit: 8/1/2024 Posts: 386 Rating: (16)	Sorry, but I can't understand the issue you're facing, anyway I founded some differences between the safety software release at first, and then I suggest to cross check the function of the safety program menu\compile\check..... (see the enclosed screenshot). If you have some fault condition then you can't hope your software run with no problem even you're able to download the same. pigroplc Attachment check.JPG (209 Downloads)

Suggestion To thank Quote Answer

4/10/2009 6:53 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	hi find the link...... hope this will help you refer page 57 http://support.automation.siemens.com/WW/view/en/22099875 regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

5/18/2009 10:37 AM	Rate (0)
rinuspieters Posts: 2 Rating: (0)	Thanks for the replies. problem solved. Input can be written and be read in safety and normal program. Output also can, but in my programmI did it on an another way with an other purpose, and that is also working now. Regards Rinus
rinuspieters Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on