Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Do Ghost By External Hard Disk

Created by: kambiz talaee at: 2/4/2012 1:35 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

2/4/2012 1:35 PM	Rate (0)
kambiz talaee Regular Member Joined: 10/12/2010 Last visit: 3/2/2024 Posts: 37 Rating: (0)	HI I Want to Do Ghost By External Hard Disck But I Do not Have Service Center , Is It Possible Send Me This Software Or in which adress can I Download it?
	Last edited by: O_Moderator at: 2/6/2012 12:22 PM new subject after splitting from /tf/WW/en/Posts/58302#top
Suggestion To thank Quote Answer

2/4/2012 5:45 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 2/10/2025 Posts: 10239 Rating: (1182)	What is your system there?

Suggestion To thank Quote Answer

2/5/2012 9:19 AM	Rate (0)
kambiz talaee Regular Member Joined: 10/12/2010 Last visit: 3/2/2024 Posts: 37 Rating: (0)	PCU50(6FC5210-0DF23-2AA0)

Suggestion To thank Quote Answer

2/6/2012 2:05 PM	Rate (1)
Viktoro Regular Member Joined: 2/23/2007 Last visit: 12/4/2023 Posts: 11 Rating: (4)	You need a pcu 50.3 or you contact your siemens office for emergency boot disks "ServiceCenter" of the PCU Base Software is now available bootable from USB stick (on base WinPE) and replaces the "emergency boot disks".After installation of the ServicePack, the image for creating the "Emergency Boot System" on USB stick is available on the PCU 50.3 under D:\Eboot. Please proceed as follows:- Start the PCU 50.3 in the Windows service mode- Insert a USB with a minimum of 256MB in one of the four USB interfaces of the PCU 50.3- Start Ghost32.exe in directory E:\Tools- Operate Ghost: Local -> Disk -> From Image and select D:\Eboot\eboot.gho as source and the USB stick as target (indicated by the memory space).- After eboot.gho has been copied to the USB stick, the PCU 50.3 can be booted from this stick by activating the boot menu during BIOS ramp-up with the ESC key (Alarm-Cancel on the control panel), and selecting the USB stick.- Booting from the USB stick via the front USB of a directly connected OP is also possible, but is much slower. Booting via a TCU is not possible.Follow the same procedure to create an emergency boot stick on the PC/PG. Ghost32 is required on the PC/PG for this purpose.
	Ein Werkzeug ist dann erfolgreich, wenn damit Dinge getan werden, an die sein Urheber nie gedacht hatte!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on