Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

do someone knowes what is this error and warnings??

Created by: femo at: 5/16/2011 5:01 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

5/16/2011 5:01 PM	Rate (0)
femo Advanced Member Joined: 10/16/2010 Last visit: 11/28/2023 Posts: 63 Rating: (0)	Trying to compile the HMI program I get this: ,Internal WARNING (detail: object {572-11534} is marked to be activated, but does not exist.).,0,1,7:58:09 AM ,Internal WARNING (detail: object {572-11543} is marked to be activated, but does not exist.).,0,1,7:58:09 AM ,Internal ERROR (detail: unknown id {572-11534}).,1,0,7:58:10 AM Thanks femo

Suggestion To thank Quote Answer

5/16/2011 5:45 PM	Rate (0)
bakerjw Posts: 126 Rating: (18)	Are you using TIA Portal V10.5 or the new V11.0 Professional? Can you post your project?
bakerjw Posts: 126 Rating: (18)
Suggestion To thank Quote Answer

5/16/2011 6:08 PM	Rate (0)
femo Advanced Member Joined: 10/16/2010 Last visit: 11/28/2023 Posts: 63 Rating: (0)	I'ts v10.5 sp2. It's someting related with the tags but not sure what. I just solve the problem but not realy knows how. I recompile all the project and then put again all the tags.And all fine now. Don't know exactly what happen, this is not the first time that something like this happen, and the software do not tells me what is the real problem. Thanks femo

Suggestion To thank Quote Answer

5/17/2011 10:34 AM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Maybe you selected a kind of animation but forgot to connect a tag? I'm not sure.

Suggestion To thank Quote Answer

5/17/2011 3:35 PM	Rate (0)
femo Advanced Member Joined: 10/16/2010 Last visit: 11/28/2023 Posts: 63 Rating: (0)	Yes, something like that I think happen. But the problem is that the software do not tells where. So if I have a big program will be a big problem to locate the error. Thanks. femo

Suggestion To thank Quote Answer

5/18/2011 10:40 AM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Mh, yes difficult. Maybe you have an older project version were everything was OK? Or did you remember where you made the last changes? Normally the compiler tells you, where to search. The only possibility I see at the moment, is to check all screens and all object. Are the all inside the screen limits, are there not-connected animations, do they have unique names, are there some other unused objects?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on