Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Documentation of the DP System Read Block - CP 342

Created by: OutOfControl at: 9/11/2007 11:43 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/11/2007 11:43 AM	Rate (0)
OutOfControl Posts: 14 Rating: (0)	...[snip] On another note does anyone have a link to any doccumentation on the functioning on a DP system read block? It appears to be some sort of standardised function (ladder logic block) and reads in from the profi network and has some other outputs such as read diagnostics and station diags. Does it read addresses from the profi network sequentially (give there is no input to the block) ? It is running through a cp 342 card
OutOfControl Posts: 14 Rating: (0)	Last edited by: CS Moderator at: 11.09.2007 22:26 new subject after splitting post to a new thread originaly published here: /tf/WW/en/Posts/11804
Suggestion To thank Quote Answer

9/11/2007 11:24 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 11/21/2022 Posts: 1161 Rating: (110)	Hello OutOfControl, please have a look at the following manual: S7-CPs for PROFIBUS Configuring and Commissioning There you will find a lot of information. Hope this will help Sabine

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on