Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Don't get any analogue output

Created by: dburgers at: 10/20/2020 3:49 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/20/2020 3:49 PM	Rate (0)
dburgers Posts: 2 Rating: (0)	Hi, I have a 6ED1052-1MD08-0BA0 connected to a AM2 AQ module to make an analogue output, but there's no output to measure between U1+ and M1, I don't get any analogue output, what did I do wrong? I've uploaded the analog out test.lsc to test it out. Does this combination 6ED1052-1MD08-0BA0 connected to a AM2 AQ, work? I see green led light on the AM2 AQ. Waiting for your reply, thanks! BR Daniel ------------------------------------------------------------------------------------------ Split from Logo AM2 AQ not working (solved). Attachment analog out test.zip (269 Downloads)
dburgers Posts: 2 Rating: (0)	Last edited by: dburgers at: 10/20/2020 15:52:08 Last edited by: Jen_Moderator at: 10/21/2020 09:05:27 New subject after splitting
Suggestion To thank Quote Answer

10/20/2020 4:00 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/10/2024 Posts: 34381 Rating: (4284)	Did you even have the program in LOGO! can transfer? Because in your program, which you have uploaded to the forum, there is a LOGO! 0BA6.Standard selected and not a LOGO!8.FS4, as it should be according to the specified article number (6ED1052-1MD08-0BA0).

Suggestion To thank Quote Answer

10/20/2020 5:02 PM	Rate (0)
dburgers Posts: 2 Rating: (0)	Hi Ixo65, I've changed the properties of the program to a LOGO!8.FS4, as specified article number (6ED1052-1MD08-0BA0), uploaded it to the LOGO( yes, it transferred and let it RUN), see attachment. But unfortunately, still no output (1000 value as 10V). Do you have more suggestions, please help, thanks! BR Daniel Attachment analog out test db.zip (236 Downloads)
dburgers Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/20/2020 5:06 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/10/2024 Posts: 34381 Rating: (4284)	Is the AM2 AQ supplied with 24VDC? Has the contact slider engaged properly? Lit the RUN / STOP LED green? What is the article number of the AM2 AQ?
	Last edited by: ixo65 at: 10/20/2020 17:06:49
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on