Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Download fail SD card

Created by: gogo2504 at: 5/5/2020 9:38 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/5/2020 9:38 PM	Rate (0)
gogo2504 Posts: 18 Rating: (0)	Hello, sorry for my english but i have a probleme and i don't understand. When i want download my LWE projet, I have this : " Download failed ! SD Card file system is not found" But I have the Logo SD Card And my logo finish by a "0" so it's compatible with LWE program. I need your help Please ! Gaultier Martinage Attachment error.jpg (149 Downloads)
gogo2504 Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

5/5/2020 9:44 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/4/2023 Posts: 31545 Rating: (3920)	Hello gogo2504, at first welcome to the forum. Which size has the mSD Card? How is the card formatted? She must be formatted with FAT32, Maximum size 32 GB. What says the crad diagnostics? Are pins of the card slot okay and not bent?

Suggestion To thank Quote Answer

5/6/2020 11:09 AM	Rate (0)
gogo2504 Posts: 18 Rating: (0)	Hello ! Tanks for your answer. My SD Card is in FAT32 and the capacity maximale is 8GB If my computer can read the SD card then can the program download it? But that still puts the error message. Attachment card sd.jpg (167 Downloads)
gogo2504 Posts: 18 Rating: (0)	Last edited by: Jen_Moderator at: 05/06/2020 13:05:59 Edited text for better reading.
Suggestion To thank Quote Answer

5/6/2020 11:18 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/4/2023 Posts: 31545 Rating: (3920)	What says the diagnostic function of the LOGO!? Main menu > Diagnostic > Hardware > SD card

Suggestion To thank Quote Answer

5/6/2020 12:47 PM	Rate (0)
gogo2504 Posts: 18 Rating: (0)	It's good ! THANKS Now I see my drawing on a page web. That's fine. I explain my project: I made a miniature elevator on 3 floors. On each floor, there is an infrared sensor which stops the elevator ( sensor 0 - sensor 1 - sensor 2) Next to my project, I have a control box with 3 buttons ( floor 0 - floor 1 - floor 2) On my logo, I have 6 inputs used and 2 outputs. I2 = Sensor 0 I3 = Sensor 1 I4 = Sensor2 I5 = Button 0 I6 = Button 1 I7 = Button 2 Q1 = GO down Q2 = To Up For the moment, when I press my control box, I see on my web page the button that I pressed and the sensor that is engaged. The display mode works perfect. [snip] Thanks you ! Attachment LWE.PNG (147 Downloads)
gogo2504 Posts: 18 Rating: (0)	Last edited by: Jen_Moderator at: 05/06/2020 13:08:21 Edited text for better reading. Last edited by: Jen_Moderator at: 05/06/2020 13:11:12 Division of answers into separate topics.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on