Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Download program using other port (RS485)

Created by: ThInk at: 11/10/2010 8:49 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/10/2010 8:49 AM	Rate (0)
ThInk Posts: 21 Rating: (0)	Hi all, Is it possible to configure Step 7 Basic to download program to S7-1200 using RS485/RS232? Thank you.
ThInk Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/10/2010 2:38 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	No.
	science guy
Suggestion To thank Quote Answer

11/19/2010 6:57 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	Hi, You can just program the S7-1200 using Ethernet interface.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/30/2010 3:15 PM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	With v11 it should be possible but not quite sure about RS485/232 interface. But e.g. profibus works or teleservice. regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on