Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Download to panel - only option Teleservice is shown

Created by: rbike at: 8/5/2016 5:10 PM (46 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2 | 3 | 4 | 5; |

47 Entries

Entries per page: 10 | 20 | all

8/8/2016 11:44 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/28/2023 Posts: 21752 Rating: (2901)	Hello, the properties on you system are wrong. I attach the properties from my system, you can see that there are some options mor available like in you screen. The empty net should be no problem, this is the default setting. Regards Christoph Attachment AdaapterSetting.jpg (338 Downloads)

Suggestion To thank Quote Answer

8/8/2016 11:45 AM	Rate (0)
rbike Posts: 35 Rating: (0)	Can I communicate with USB if a USB selection is made. Is the USB lead a standard A - B USB lead. Regards, Rob Attachment screenshot2.png (219 Downloads)
rbike Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

8/8/2016 11:55 AM	Rate (0)
rbike Posts: 35 Rating: (0)	Christoph, What do I need to do to put the situation right. Regards, Rob
rbike Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

8/8/2016 11:56 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/28/2023 Posts: 21752 Rating: (2901)	Hello, the Basicpanel have no USB port for a connection to PC. Regards Christoph

Suggestion To thank Quote Answer

8/8/2016 12:14 PM	Rate (0)
rbike Posts: 35 Rating: (0)	Christoph, Is this the problem, the PC adapter USB shows up as a USB connection and not in the SIMATIC.NET selection. Do I need to uninstall the communication lead and reinstall. I tried uninstalling the driver, but when I plugged the lead back in it re-instated it again as USB. Regards, Rob Attachment screenshot3.png (218 Downloads)
rbike Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

8/8/2016 12:37 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/28/2023 Posts: 21752 Rating: (2901)	Hello, is listed correct, the PC Adapter USB is in SIMATIC Devices because SIMATIC NET doesn't support this adapter type! Which Operating System do you have ? The problem can be the Microwin and TIA installation on the same system. Regards Christoph

Suggestion To thank Quote Answer

8/8/2016 12:57 PM	Rate (0)
rbike Posts: 35 Rating: (0)	Christoph, The laptop is a dual hard drive with two operating systems which cannot interfere with each other. The TIA is on the windows 7 hard drive and the microwin is on the windows XP hard drive. Regards, Rob
rbike Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

8/8/2016 1:07 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/28/2023 Posts: 21752 Rating: (2901)	Hello, ok and which Windows 7 you have installed ? (x64 or x86)? We can try to reset the Communication Interfaces an hope this fix the problem. Regards Christoph

Suggestion To thank Quote Answer

8/8/2016 1:14 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 9/28/2023 Posts: 2922 Rating: (475)	Hello rob, the strange thing is that there is no configuration shown in your screenshot of the PC Adapter properties. Maybe you have to (re-)install the PC Adapter driver. Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

8/8/2016 1:15 PM	Rate (0)
rbike Posts: 35 Rating: (0)	Christoph, The system for the TIA is windows 7 ultimate x86. Regards, Rob
rbike Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4 | 5; |

47 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on