Keeping it simple and short, is it possible to download a program in a CPU using a Ethernet CP (specifically 443-1EX20-0XE0)? Obviously, both are on the same rack and I dont have a PC adapter at my disposal. CP has already been initialized by the guy I bought it from and has a valid IP address. In addition to that, I also have a CP1613 installed in my PC.

If it is possible to download the program in CPU via CP, then please let me know the procedure.

Thank you.

But the document in your provided link doesnt explain explicitly how the entire procedure is done using Ethernet as the PG/PC link. However, I was able to find the following link, that does solve my problem to an extent.

I was able to download my program in the PLC, get online with it, but NO uploading. Whenever I try to upload the station using 'PLC -> Upload Station to PG', the appearing menu does detect the parameters of connected CP, but on pushing OK, a message appears stating that 'Program can only be uploaded from a CPU and one needs to be selected from the list'. The point is, since there is no direct connection between CPU and PG, how is it gonna show in the stations list of UPLOAD menu!!

Is there any way to upload the program using CP 443 (maybe by using any sort of gateway or something)??

Thank you.

I managed to upload it as well. You just need to put the the correct rack and slot number in the upload dialouge and voila!

Thank you.