Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Downloading to PLC very slow

Created by: Traoter at: 12/23/2014 10:15 PM (6 Replies)

Rating (0)

Thanks 1

7 Entries

12/23/2014 10:15 PM	Rate (0)
Traoter Advanced Member Joined: 11/1/2008 Last visit: 1/10/2025 Posts: 12 Rating: (0)	Hello, I have a question about the downloading time from TIA portal (V13 Update 6) to an IM151-8F PN/DP CPU V3.2 When I want to download a change in the program, it takes at least 6 to 7 minutes before it is completed. The message is during the compile: Check before downloading. This takes a very very long time and is not a workable situation during commisioning. Is this a known issue and how can it be solved? The message is in the attachment. Thanks in advance. Traoter Attachment IMAG0554.jpg (221 Downloads)
	Last edited by: Traoter at: 12/23/2014 10:16 PM Last edited by: Traoter at: 12/23/2014 10:16 PM
Suggestion To thank Quote Answer

3/31/2015 2:41 PM	Rate (0)
ajrcruncha Experienced Member Joined: 8/12/2013 Last visit: 4/12/2023 Posts: 18 Rating: (0)	Hi, i have the same problem. did you ever find a solution?

Suggestion To thank Quote Answer

4/1/2015 8:24 PM	Rate (0)
Traoter Advanced Member Joined: 11/1/2008 Last visit: 1/10/2025 Posts: 12 Rating: (0)	Hello, yes, I did tree things to make it faster 1. update to V13 SP1 2. Disable in the safety manager the online/ offline compare. 3. CPU firmware update to V3.2.11 I hope this will work for you too.

Suggestion To thank Quote Answer

4/2/2015 1:46 PM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	The Download- and online-behavior with TIA and classic-CPUs was improved with V13 SP1. So I would recomment to install this.

Suggestion To thank Quote Answer

1/12/2016 2:15 PM	Rate (0)
Rover Dan Bronze Member Joined: 9/14/2007 Last visit: 1/15/2025 Posts: 4 Rating: (0)	Hi, i have the same problem. TIA portal v13 SP1 U6. Except that the whole tia portal is generally very very slow. SP1 or Update 6 not helped.

Suggestion To thank Quote Answer

3/11/2016 10:04 AM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Hi, which PLC you use? What else you have in project? How many code you have? What you like to download? How slow is "slow" in your case?

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Duris_I

3/11/2016 11:48 AM	Rate (0)
Saeed Bahadori Posts: 63 Rating: (8)	one times it occured for me by one s7-300 station and when i changed my profinet cable by cate6 cable it had been true.
Saeed Bahadori Posts: 63 Rating: (8)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on