Navigation

DP-Kopplung S7-300 mit CP 342-5 (Slave) und IM 308-C (Master) mit STEP 7 V5.2 und COM PROFIBUS V5.1

Created by: Remsov at: 2/13/2006 12:51 PM (1 Replies)

2/13/2006 12:51 PM	Rate (0)
Remsov Posts: 1 Rating: (0)	Hello, I tryed to make the DP connection work as in the example given by Siemens, but it doesn't work. Beitrags-ID:6711776 Who has a tip? Bert.
Remsov Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/13/2006 1:08 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 10/5/2024 Posts: 1162 Rating: (111)	Hello Remsov, please descripe what your problem is. Give more informations such as entrice of the diagnostic buffer, status of the FC which are programmed in the S7-300 CPU, LEDs on the modules, an so one. Without further information it isn't possible to say what happend. [:(] Best regards Sabine

Suggestion To thank Quote Answer