Navigation

drag and drop the telegram to drive

Created by: aurora at: 11/2/2011 11:26 AM (1 Replies)

11/2/2011 11:26 AM	Rate (0)
aurora Member Joined: 9/2/2011 Last visit: 8/10/2012 Posts: 1 Rating: (0)	Pegaia Hi, I attached here a very simple sample program with S7-1200 and Sinamics G120 in Profinet. The ZIP file has the STEP7 V11 Project and the GSDML data. In principle, the main steps are: create a project with a S7-1200 CPU, import the GSDML, drag&drop it to the Network View, drag&drop the connection to the PLC, drag&drop the Telegram 1 to the drive,build a simple logic onOB1, compile all and download all and configure the device name on the drive. Attachment:pn.zip (584 Downloads) Thank you for a good example program! Unfortunately I have trouble when "drag and drop the telegram" to the drive. 1. I double click onmy drive (S110) in the network view. 2. In the device view I found "Telegram 110" in the list to the right, andI "drag it", but I can't drop it anywhere? So my question is, where should I drag and drop the telegram? Is it possible to do it inother ways? Thank you for your help!
	Last edited by: O_Moderator at: 1/23/2012 11:25 AM Last edited by: O_Moderator at: 1/23/2012 11:23 AM new subject after splitting from /tf/WW/en/Posts/57543#top
Suggestion To thank Quote Answer

1/23/2012 11:13 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/14/2025 Posts: 4392 Rating: (1462)	Hi, here is a printscreen of that. Attachment untitled.JPG (599 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer