Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Drive data in 840DSL problem

Created by: Fritz Y at: 9/18/2009 8:03 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/18/2009 8:03 AM	Rate (0)
Fritz Y Posts: 6 Rating: (1)	Hi, I want to know whether I can get complete data archives(NC, PLC, Drive)from a single NCU720 without drive CliQ connections to motor modules? Especially the drive data, sincethere's no data stored inmotor module, does it mean motor module is not needed when I back up drive data?
Fritz Y Posts: 6 Rating: (1)
Suggestion To thank Quote Answer

9/18/2009 10:17 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (52)	hi in the case of 840D -SL you have to maintain 3 archives: 1.NC- which contains the mahcine datas and program 2.DRIVE- which contains the drive boot files 3.PLC - the plc blocks 840dsl is very much similar to 840di , so we need to have the above backups with regards ram

Suggestion To thank Quote Answer

9/18/2009 5:27 PM	Rate (0)
alcor Posts: 13 Rating: (1)	Drive data is saved on the CF card of the NCU but, if you do not have a connection to the Motor Modules, the archive will not reflect the desired configuration... Still, you may improvise something having just the NCU. Make a backup of the CF card, and save NC and PLC archives. But remember, this should be just a temporary solution, till you may perform the real backup of the machine (NC without faults, PLC in STOP, no tool in spindle, User Agreement not set for SI, etc...)
alcor Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

9/22/2009 6:40 AM	Rate (0)
Fritz Y Posts: 6 Rating: (1)	Thank you very much!
Fritz Y Posts: 6 Rating: (1)
Suggestion To thank Quote Answer

2/3/2014 6:57 PM	Rate (0)
GrasserF Posts: 340 Rating: (6)	new question is splittet to I need to copy only drive machine data.
GrasserF Posts: 340 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on