Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Drive disable

Created by: Import-User-1 at: 9/10/2012 8:39 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/10/2012 8:39 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Import of a Technical Question of the User nitindangwal nitindangwal Hi i want to diable a drive/axis so that i can run the machine to carry on maintenence work.Cn you pleasehelp me the way for diabling a drive / axis??? Regards Nitiin Dangwa
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

9/10/2012 9:03 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai, In which Drive you have to disable the drive and Axis?.Simodrive/Sinamics ?? Thanks and Regrads, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

9/10/2012 12:02 PM	Rate (0)
nitindangwal Posts: 21 Rating: (0)	Hi i'm having Siemens 840 D controll and the drive i wnana to disable is U-axis. as i have to carry some maintenance on b-axis it is necessary for me to dismount the u axis and diable the same. Please help . Regards Nitin Dangwal
nitindangwal Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

9/10/2012 4:45 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... You want to remove the drive /retain as it is...if you don't want to remove the drivetry keeping the 30130=0 and 3024=0 (Simulation axis) feed back will display in the screen but axis will not move... try check this... Please ensure how the PLC logic is written ...before doing any kind of activity.... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

11/27/2012 9:58 AM	Rate (0)
nitindangwal Posts: 21 Rating: (0)	Thanks!!!
nitindangwal Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on