Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 2
5 Entries
| 11/10/2015 11:34 AM | |
|
Posts: 5 Rating:
|
I have a similar problem. Every time I switch OFF power to the drive, its p0010 becomes 1 no matter what i save before that. How to get rid of that? Can anyone suggest something? Thanks ------------------------------------------------------------------------------------------ |
Last edited by: Min_Moderator at: 11/10/2015 3:02:06 PMNew subject after splitting |
|
| 11/10/2015 3:47 PM | |
Joined: 6/30/2009 Last visit: 9/12/2024 Posts: 9 Rating:
|
It Looks that you lost all the paremeter with the drive power off.
Guess Copy RAM to ROM would help. |
| 11/11/2015 2:30 AM | |
|
Posts: 5 Rating:
|
I have all the other parameters intact. The problem is only happening with p0010. I have even done factory reset but in vain. Is it firmware problem? |
| 11/11/2015 6:33 AM | |
Joined: 1/8/2013 Last visit: 9/29/2023 Posts: 19 Rating:
|
You must finish Quick Commissioning ! You can used Wizard ... or P3900. |
This contribution was helpful to
|
|
| 11/12/2015 8:46 AM | |
Joined: 2/9/2015 Last visit: 8/27/2024 Posts: 1 Rating:
|
1. Copy RAM to ROM when you finish commissioning. 2. Try to find a spare part and have a test. |
Follow us on