Navigation

drive ready signal light blinking

Created by: Ecopulp at: 3/16/2024 11:55 AM (1 Replies)

3/16/2024 11:55 AM	Rate (0)
Ecopulp Posts: 1 Rating: (0)	Our drive ready signal light blinking not running please give me your feed back ------------------------------------------------------------------------------------------ Split from SINAMICS G120 Ready But Not Running .
Ecopulp Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 03/18/2024 12:20:53 New subject after splitting
Suggestion To thank Quote Answer

3/19/2024 12:33 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/3/2024 Posts: 5954 Rating: (819)	Hello Ecopulp, what SINAMICS are you using? In the corresponding operating instruction manual you can find detailed information about the meaning of RDY LED signals. See chapter 9.1 of CU240E-2 operating instruction manual for example. https://support.industry.siemens.com/cs/ww/en/view/109818082 If RDY LED is blinking fast in red colour a fault is active. Check fault buffer, clear fault reason and acknowledge fault.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer