Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Driver s120 and servo motor

Created by: milhaushk at: 2/14/2019 7:32 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/14/2019 7:32 AM	Rate (0)
milhaushk Advanced Member Joined: 10/5/2016 Last visit: 12/15/2022 Posts: 23 Rating: (2)	Hi all, can you help me please? I have ssd servo motor ,and i need new servo drive can i use s120 ? or i have use other drive ? And PLC in S7 300 and communication is DP. Thanks Attachment image005.jpg (19 Downloads)

Suggestion To thank Quote Answer

2/14/2019 8:09 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 2/2/2023 Posts: 4088 Rating: (630)	The most limiting factor, in this case, is the encoder of the motor. If it is not supported by Sinamics, you won't get it running. So, what type of encoder do you have?
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

2/14/2019 9:05 AM	Rate (0)
milhaushk Advanced Member Joined: 10/5/2016 Last visit: 12/15/2022 Posts: 23 Rating: (2)	Hi Thanks but i have small experience with drive here is report from SSD driver 637/f and set up this servo drive SSD. Thanks You Attachment SSD.pdf (16 Downloads)

Suggestion To thank Quote Answer

2/14/2019 9:19 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 2/2/2023 Posts: 4088 Rating: (630)	There's something about resolver in the document. Presuming that this is actual encoder type of your motor, then with help of an SMC10 module, you should be able to operate the motor with S120.
	Last edited by: jacek d at: 2/14/2019 9:20:09 AM Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

2/14/2019 9:33 AM	Rate (0)
milhaushk Advanced Member Joined: 10/5/2016 Last visit: 12/15/2022 Posts: 23 Rating: (2)	Hi yes we have resorver :D I send you elektric plan . Attachment image004.jpg (20 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on