8/5/2006 11:09 PM | |
Posts: 36 Rating:
|
Yes!Thank you, you were helpful [:D][:D][:D] |
8/7/2006 9:56 AM | |
Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating:
|
Glad to help [:D] |
12/11/2008 4:32 PM | |
Joined: 10/22/2008 Last visit: 2/16/2021 Posts: 59 Rating:
|
Hello Insausti, perhaps the following applications can help you. Please look in the Documentation: Sample Blocks for WinCC and STEP 7on page 27181under the following link. ttp://support.automation.siemens.com/WW/view/en/31624179 Quotation of the document: This section describes how to set up WinCC Runtime so hat it is divided into overview area, working area and key area. The functions for picture navigation (picture change) are provided. It also describes how systems with several monitors are used. The functions for calling faceplates are described in the next section. Note This section is only of importance if you are not using OS Project Editor.If you are using OS Project Editor, picture management functions (change process picture, open faceplate) are available by default. Amno |