I should write it as 

Text<Tag : 20, Piece_Code>

I dont know what it means Tag number, but I have no tag numbers in my WinCC 

Thank you for help

Thank you very much for help

Dear Romario86,

dou you know the comment function?

At the end of this FAQ you can find a input mask for comment through this FAQ. Can you use this function?

Can you help? I would like to use dynamic text list, 

but dont know what is wrong, 

I do not understan associated phone number and dynamic text list????

Unfortunately it is not shown in the example you have referenced, but you have to do the following:

1. Enter the static text part
2. Where you want the reference inserted, right click the text

There are 3 kind of references for a textlist entry text:

• Tag value (with formatting)
• Textlist reference
• Control tag value (the value of the tag that has selected this entry)

Please check the attachment for clarification.

Good luck!

Well tag/textlist embedded values ARE possible in Basic for Alarms, but not in other types of texts.

Hi, 

Thank you, I dont know what I had wrong, but working finally. 

Hi, 

I'm Reviving this post 'cause I want to do the same thing but with Text list instead of Tag.

When I insert the Text List the pop-up ask me to insert the TextList i want to reference but ask me too about a Tag, Which Tag would be?

I followed this tutorial (Dynamic Text List (Tia Portal)) but the 3rd point (most important) is not very explained about this stuff.

Can Someone help me?

Best Regards.