Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Editing Alarm Messages on a 840D

Created by: Stevie Bramwell at: 11/4/2010 10:00 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

11/4/2010 10:00 PM	Rate (0)
Stevie Bramwell Posts: 17 Rating: (0)	Hi, I came across an alarm a couple of days ago that had no text to tell me what it meant. I used our PG to look in the ladder and clear the problem. I now want to edit the text of this alarm so that if it occurs in the future we will know what is wrong. It is an 840D with a MMC100.2 control. I know how to do it on a PCU 50 by going into the MMC/HMI Editor and finding the alarm file e.g. F:\USER\oemname_UK.COM. However the MMC100.2 doesn't have a harddrive and I don't know where to find the alarm file etc. Does anyone know how I can edit the message / where to find the appropriate file if there is one. Thanks in advance. Stevie
Stevie Bramwell Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/5/2010 12:41 AM	Rate (1)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	HI, Find the attachement. Muthamizh Attachment Alarm creation in PCU50-PCU20.pdf (579 Downloads)
	Regards, ŠΜS
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Stevie Bramwell

11/5/2010 4:29 AM	Rate (0)
Stevie Bramwell Posts: 17 Rating: (0)	Exactly what I was looking for. I've punched the text file, edited it, and reloaded it. I then forced the alarm to check that it was correct. Thanks Stevie
Stevie Bramwell Posts: 17 Rating: (0)	Last edited by: Stevie Bramwell at: 11/5/2010 4:29 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on