Navigation

EEPROM module for CPU103

Created by: AutoGen_873639 at: 1/25/2015 9:46 PM (1 Replies)

1/25/2015 9:46 PM	Rate (0)
AutoGen_873639 Posts: 1 Rating: (0)	Hi guys, I have an old machine with a S5 CPU103. The program is loaded on a OLA41 Eprom module but now I have to make a little modification and I need to use a EEPROM module. Is it possible to use a 6ES5 375-OLC61 EEPROM module on a S5 CPU103? The 0LC41 have only 8192 instruction and this is not enough... Thank you very much Roberto
AutoGen_873639 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/25/2015 10:16 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 6/10/2023 Posts: 30006 Rating: (3731)	No, isn't possible. Maximum by S5 -100 CPU103 is 6ES5 375-0LC41 (8192).

Suggestion To thank Quote Answer