HI all,

i have a problem sending email with TMAIL_C block on a 1515-2 CPU. I had setted all parameters properly (see pic 1 and 2) and when i send the activaction signal of TMAIL block the STATUS is 16#7002 and BUSY is true, after 7/8 seconds the STATUS returns on 16#0000 and BUSY is false. The DONE never became true (the merker 200.6 will be setted if DONE becomes true for one cycle) and no email is sended, no any error occurs and no email was sended (see pic 3).

The PLC has the gateway properly setted and the server SMTP is on port 25. The network is on IPv4. The SMTP doesn't require any authenticatio, so there are no user and password in the DB parameters.

Where is the error? Thank you