Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Empty HW Catalog

Created by: layudhi at: 8/24/2011 3:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/24/2011 3:09 PM	Rate (0)
layudhi Posts: 60 Rating: (1)	Dear All, I really need help. I just Installed Step 7 V5.5, but i could not start working with it because most of my project (which had been developed using Step 7 V5.4 SP5) could not be opened My problem is, my V5.5 did not have HW CPU315-2 PN/DP V3.1 I tried to update my HW via Online and Ofline, but there are no update for Firmware V3.1 Attached file is my HW Config preview window that shown my CPU315-2 PN/DP with no updated firmware on it (Empty Folder) Regards, laYudhi Attachment CPU315 2 PN DP.JPG (49 Downloads)
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

8/27/2011 7:02 AM	Rate (0)
layudhi Posts: 60 Rating: (1)	Its almost 3 days since i posted this thread. Anyone plese help, give me some suggestion.. shuld i downgrade my Step7 to V5.4 again ?
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

8/27/2011 8:27 AM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 8/25/2022 Posts: 1750 Rating: (270)	Well, i checked required firmware version in your case in my Step7 V5.5. it is available with me. i think there is a problem with Step7 V5.5 Installation. you try to repair your Step7 V5.5. i hope that it will resolve the issue.
	Last edited by: Amit_86 at: 8/27/2011 8:27 AM VANDE MATARAM.....
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on