Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Empty program plc

Created by: R.kra at: 12/18/2018 12:15 PM (3 Replies)

Rating (1)

Thanks 2

4 Entries

12/18/2018 12:15 PM	Rate (0)
R.kra Posts: 8 Rating: (0)	Hi, I am new to using the Siemens logo plc. So this is the first project I do with this device. To place the program to the 0BA8 device I use a sd-card. But the plc doesn't seem to work with the program on the sd. The pc will show the program on the sd, but the plc only shows an empty program. What can I do to make the plc read the LOGO_U_P.bin program? In the info window the LOGOComfort shows: 0 Message blocks lines transferred.
R.kra Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

12/18/2018 1:34 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/18/2025 Posts: 34503 Rating: (4306)	Hello R.kra, at first welcome to the forum. From a distance, it is always difficult to make a diagnosis. Is the SD card formatted with FAT32? Has the card been formatted completely (slow formatting, no fast formatting)? Is the capacity of the card not larger than 32 GB? Can you upload your program to the forum as a zip file? Which LOGO! are you exactly? Please write the firmware version.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users R.kra

12/18/2018 2:27 PM	Rate (0)
R.kra Posts: 8 Rating: (0)	Hi ixo65, Thanks for your help. The problem was that I had selected the 0BA8standard in the hardware settings. This had to be 0BA8 FS4, so now it's solved.
R.kra Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

12/18/2018 2:31 PM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/18/2025 Posts: 34503 Rating: (4306)	R.kra The problem was that I had selected the 0BA8standard in the hardware settings. This had to be 0BA8 FS4, so now it's solved. I'm glad that it works now. That's the most important thing.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users R.kra

|

Share this page:

Share this page on...

Follow us on