Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Enable horn Annunciate

Created by: mccalltl at: 12/4/2008 7:15 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/4/2008 7:15 PM	Rate (0)
mccalltl Posts: 3 Rating: (0)	Hello, We have a multiproject with 2 sets of OS servers using Wincc 6.2 SP 2 HF 5. The operators primarily only look at their own servers and alarms. We would like to enable horn annunciation for alarms from either set of servers. We have set up an OP-D tag on the HMI called horn_enable. When set to true we would like alarms from either set of servers to sound the horn at both locations. Currently our alarms are visible at both locations with sound only at the originating locations. Thanks
mccalltl Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

12/8/2008 3:20 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi, Have you seen the following FAQ? How is the horn editor configured for single-user stations, servers, redundant servers and client OS stations in SIMATIC PCS 7 / WinCC? You have mentioned severs, what about clients? Can you post screenshots of your Horn Editor settings? Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on