Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Encoder_Connection

Created by: List at: 7/21/2012 6:20 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/21/2012 6:20 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai All, Having one 840D PowerLine CNC boring machine with PCU50. Presently Machine not having any Handweel connection; If I have to connect new encoder what are the setting have to check/do in controller as well as connections?? In OP,Handweel softkey pressed,only x,y,z axis is shiwing, I have to extend this to 8 Axis,as machine having 8 axis,How i will do this??? Please anyone give feedback., Thanks&Regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

7/21/2012 9:00 PM	Rate (0)
Mosh Experienced Member Joined: 7/7/2011 Last visit: 1/5/2025 Posts: 89 Rating: (5)	there is a bit of step7 plc work to do to select which handwheel is connected to which axis

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on