Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Encoder Pulse Monitoring

Created by: Nanu_333 at: 8/16/2011 9:11 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/16/2011 9:11 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 12/23/2024 Posts: 196 Rating: (5)	Dear All, Please help me. I am having 840C CNC ,For X-axis ther is linear scale(Incremental type),After getting reference it is giving encoder pulse monitoring alarm.Axis is moving befor referencing, but aftre referencing it is giving above alarm,due to dis i cant move axis further.but before referencing i can move the axis in jog. Plz help me as fast as possible..

Suggestion To thank Quote Answer

8/16/2011 9:28 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... When your providing some informations....provide basic details like.... Alarm no? Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

8/16/2011 10:42 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 12/23/2024 Posts: 196 Rating: (5)	The alarm number is 1400

Suggestion To thank Quote Answer

8/16/2011 12:52 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Looks like there transmission error/ noise from the encoder......Check your Linear scale-cable-connector..... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on