Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

eplan p8 macro 6ES7212-1ad30-0xb0

Created by: Ahmet.Topcu at: 7/7/2011 12:59 PM (7 Replies)

Rating (0)

Thanks 3

8 Entries

7/7/2011 12:59 PM	Rate (0)
Ahmet.Topcu Posts: 3 Rating: (0)	Hello Input Output addresses 1ad30-0XB0 6ES7212-show format. .ema I need a macro extension Eplan p8. Is there anyone who can help? Best regards
Ahmet.Topcu Posts: 3 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users zhengzhi

7/7/2011 1:12 PM	Rate (0)
Bilao Posts: 378 Rating: (47)	Hello Ahmet.Topcu, have you seen the following thread CAx-data in the Service & Support Portal.? Maybe it can help you. Best regards Bilao
Bilao Posts: 378 Rating: (47)
Suggestion To thank Quote Answer

7/7/2011 2:49 PM	Rate (0)
Ahmet.Topcu Posts: 3 Rating: (0)	hi i'm sorry we have another problem. we can't open the file which one is below in eplan when we open this file this open with excel. how we can open this in eplan. Attachment caxonline_EXCEL_110705_025135.zip (982 Downloads)
Ahmet.Topcu Posts: 3 Rating: (0)	Last edited by: Ahmet.Topcu at: 7/7/2011 3:36 PM
Suggestion To thank Quote Answer

7/7/2011 8:18 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 12/23/2024 Posts: 2325 Rating: (309)	Hello If you open the file in Excel, you will find that there is an error msg in the file saying that Eplan Macro for the requested module is not available in CAx. Therefore you have an Empty Eplan Macro folder. If fact As far as I have seen, it CAx contains only the Eplan Macros of S7-300, 400 and Simatic NET components. It does not seem to have Eplan Macros for S7-200, S7-1200, Drives etc. Sorry to disappoint you Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

7/11/2011 4:43 PM	Rate (0)
Ahmet.Topcu Posts: 3 Rating: (0)	Hello Navnag As you said; There is no such thing as the last bug in a program There are no stubborn bugs, There are only Debuggers stubborn. With the help of Allah we have found a way to solution to this problem. Eplan P8 Macro 6ES7212-1AD30-0XB0 have sent down at the address below. We used different variables in the macro project. Xml extension, but could not provide the Part List. Therefore, we had to manually enter information.Thank you for your cooperation. https://www.automation.siemens.com/bilddb/download.aspx?reqInsID=705794 Best regards
Ahmet.Topcu Posts: 3 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Navnag

12/21/2011 10:01 PM	Rate (0)
HamaYoko Posts: 19 Rating: (0)	In the edz container you have all the stuff for EPLAn P8. ema file is inside. XML files are the article properties for the parts database. bye!
HamaYoko Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

5/4/2012 8:58 AM	Rate (0)
Iridium Posts: 1 Rating: (0)	how did you find this ID number?
Iridium Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/4/2012 9:12 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 12/17/2024 Posts: 4518 Rating: (841)	Navnag .................... It does not seem to have Eplan Macros for S7-200, S7-1200, Drives etc. Sorry to disappoint you Navnag I am afriad that this is not very acurite answer. The best way to know quickly if there are macros of E-Plan for certain product is to go to CAx. S7 1200 & S7 200 still do not have official Macros provided from this web site. *May be some other users make these macros for their work and have to pleasure to provide you with it. But take care, you have to revise the wiring and every thing as it is not official macros.* About drives. No, there are macros for Siemens drives like in this entries: EPLAN-, ELCAD- and .dxf-macros for SINAMICS and MICROMASTER EPLAN V5.70 circuit diagram macros for SINAMICS S120 AC Drive Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Gabriel de Oliveira

|

Share this page:

Share this page on...

Follow us on