Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

EPos for idiots

Created by: Tractor at: 4/4/2016 6:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/4/2016 6:18 PM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 12/8/2023 Posts: 1041 Rating: (127)	I need an 'Simple guide' for EPos, for CU250S, having failed with the published literature. Any assistance will be greatly appreciated.
	Last edited by: tractor at: 4/4/2016 6:18:58 PM Last edited by: tractor at: 4/4/2016 6:19:29 PM Last edited by: tractor at: 4/4/2016 6:20:03 PM Tractor
Suggestion To thank Quote Answer

4/6/2016 9:38 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/8/2023 Posts: 5725 Rating: (771)	Hello, there is an example. https://support.industry.siemens.com/cs/ww/en/view/68109071
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

4/14/2016 4:04 PM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 12/8/2023 Posts: 1041 Rating: (127)	Having tried the supplied detail and failed, I need a guide which does not involve a serial communication. This application requires digital inputs into the PM250 which select qty 4 moves. This will be a trapezoid which will run for 2 Meters, for example, and stop. The distance to be selected from the qty 4 moves as required.
	Tractor
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on